Choose your language

5 December 2016

// // Our Youtube channel

ASSISTANT ENGINEER KERALA WATER AUTHORITY ONLINE EXAM DATE:05-12-2016

ASSISTANT ENGINEER
KERALA WATER AUTHORITY
ONLINE EXAM DATE:05-12-2016
PDF FILE DOWNLOAD     DOC FILE DOWNLOAD

1.How many women members had attended on the occasion of the first Constituent Assembly in independent India?
A.18
B.15*
C.13
D.11
Ans:B

2.Where was borrowed from the idea of Nominal head such as President,Cabinet system of Ministers,Post of Prime Minister,etc?
A.United States of America
B.Ireland
C.France
D.United Kingdom*
Ans:D
3.Who was the Chairman of the Minorities’Sub Committee of the Constituent Assmebly?
A.G.V.Mavalankar
B.J.B.Kripalani
C.K.M.Munshi
D.H.C.Mukherjee*
Ans:D
4.How many times Mahatma Gandhi visited in Kerala?
A.5*
B.4
C.3
D.2
Ans:A
5.The book Pathompatham Nottandile Keralam is written by
A.P.Shankunni Menon
B.K.P.Padmanabha Menon
C.P.Bhaskaranunni*
D.Vaikathu Pachu Moothathu
Ans:C
6.Who amongst the following writers has worked for women and tribals in Bengal?
A.Mahasweta Devi*
B.R.Champakalakshmi
C.Tanika Sarkar
D.Uma Chakravati
Ans:A
7.Which is the correct chronological order of the following leaders?
I.Sree Narayana Guru
II.Vaikunda Swamikal
III.Thykkadu Ayyavu
IV.Chattambi Swamikal
A.IV,III,I,II
B.II,III,IV,I*
C.II,III,I,IV
D.III,II,I,IV
Ans:B
8.IMDB is an online database of information and ratings that related to----------
A.Fiction
B.Art
C.Internet sites
D.Film*
Ans:D
9.Oozhiyam means
A.The forced labour service*
B.Peasantry
C.Feudal labour
D.Government service
Ans:A
10.Who was wrote the translated Malayalam novel Akbar in 1894?
A.A.R.Rajaraja Varma
B.Makthi Thangal
C.Kerala Varma Valiyakoi Thampuran*
D.C.V.Raman Pillai
Ans:C

11.When was All Kerala Grandhasala Sangham formed?
A.1945*
B.1955
C.1935
D.1925
Ans:A
12.Who is the author of Muhyadheen Mala which is twined to folk genre Mappila Pattukal?
A.Fazal Pookkoya Thangal
B.Moinkutty Vaidhyar
C.Qazi Muhammed Ibn Abdul Aziz*
D.Shaikh Zainudheen Makhdoom
Ans:C
13.Chairperson of the ‘Thiyya Yuvajana Sangham’at Pattanakkadu in 1934 was----------
A.R.Sankar
B.C.Kesavan
C.C.V.Kunhiraman
D.E.Madhuvan*
Ans:D
14.What was the central focus of Rajiv Awas Yojana(RAY)?
A.To help the slum dwellers*
B.To help the lower castes
C.To help the Adivasis
D.To help the Minorities
Ans:A
15.’Equal pay for equal work for both men and women’is referred in Indian Constitution of---------
A.Directive Principles,Article 44
B.Directive Principles,Article 39(A)
C.Directive Principles,Article 39(C)
D.Directive Principles,Article 39(D)*
Ans:D
16.’Kleptophobia’means
A.Fear of computer
B.Fear of children
C.Fear of stealing*
D.Fear of travel
Ans:C
17.Which organization/mission belongs to Ramon Magsaysay Awardee,Bezwada Wilson?
A.Swachh Bharat Abhiyan
B.Safai Karmachari Andolan*
C.Narmada Bachao Andolan
D.Jan Sahas Social Development Society
Ans:B
18.Pusarla Venkata Sindhu’s home town is----------
A.Bengaluru
B.Hyderabad*
C.Secunderabad
D.Puducherry
Ans:B
19.In which city Anne Frank write her famous diary?
A.Utrecht
B.The Hague
C.Botterdam
D.Amsterdam*
Ans:D
20.Herself:Gender and Early writings of Malayalee Women is written by---------
A.K.Sardamoni
B.Janaki Nair
C.J.Devika*
D.G.Arunima
Ans:C
21.A reversible heat engine receives 300 kJ from a heat source,delivers 100 kJ of work and rejects the balance heat to a sink.If the sink is at ‘30^@C’,determine the temperature of the heat source
A.’45.55^(@)C’
B.’181.55^(@)C’*
C.’171.55^(@)C’
D.’161.55^(@)C’
Ans:B
22.For the same compression ratio
A.Thermal efficiency of Otto cycle is greater than that of Diesel cycle*
B.Thermal efficiency of Otto cycle is less than that of Diesel cycle
C.Thermal efficiency of Otto cycle is same as that of Diesel cycle
D.Thermal efficiency of Otto cycle cannot be predicted
Ans:A
23.In Aqua-Ammonia and Li-Br water absorption refrigeration systems,the refrigeratants are respectively
A.Water and water
B.Water and Li-Br
C.Ammonia and Li-Br
D.Ammonia and water*
Ans:D
24.An apartment has a cooling load of 300 MJ/ddy.An air conditioner working 24 hours a day will have an approximate capacity of
A.5TR
B.2TR
C.1TR*
D.7.5TR
Ans:C
25.A pelton wheel is ideally suitable for:
A.High head and high discharge
B.Low head  and low discharge
C.High head and low discharge*
D.Medium head and medium discharge
Ans:C
26.A fluid jet of cross sectional area A and velocity V and density n strikes a flat plate moving with a velocity u.The fluid mass striking it per second is
A.n~AV
B.n~A(V+u)
C.n~A(u?V)
D.n~A(V?u)*
Ans:D
27.The radial heat transfer rate through hollow cylinder increases as the ratio of outer radius to inner radius
A.Decreases*
B.Increases
C.Constant
D.None of the above
Ans:A
28.The unit of coefficient of convective heat transfer ‘h’is expressed as
A.W/mK
B.W/m2K*
C.W/hmK
D.W/h2m2K
Ans:B
29.An increase in the percentage of carbon in steel results into decrease in its
A.Hardness
B.Corosion resistance
C.Ultimate strength
D.Ductility*
Ans:D
30.Dislocation in materials is a ----------defect
A.Point
B.Line*
C.Plane
D.Volumetric
Ans:B
31.For transmission of maximum power the maximum tension in the belt should be
A.Equal to centrifugal tension
B.Two times the centrifugal tension
C.Three times the centrifugal tension*
D.Four times the centrifugal tension
Ans:C
32.A worm gearing is used to obtain speed reduction between shafts whose axes are
A.Perpendicular and do not intersect*
B.Inclined
Ans:A
33.A 50 mm diameter rod is to be turned on a lathe at a cutting speed of 30 m/minute.The required spindle speed in rpm should be approximately
A.160
B.170
C.180
D.190*
Ans:D
34.The angle between the face and flank of the single point cutting tool is known as
A.Rake angle
B.Clearance angle*
C.Lip angle
D.Point angle
Ans:B
35.The swaying couple in locomotives has maximum or minimum value when the angle of inclination of crank with the line of stroke.
A.’30^(@)’
B.’45^(@)’*
C.’60^(@)’
D.’90^(@)’
Ans:B
36.At a particular rotational speed the unbalanced force due to revolving mass
A.Varies both in magnitude and direction
B.Is constant in magnitude as well as direction
C.Varies in magnitude but is constant in direction
D.Is constant in magnitude but varies in direction*
Ans:D
37.The static deflection of a shaft under a fly wheel is 1mm.What is the critical speed in rad/s.if g=10 m/s^(2)’
A.100*
B.200
C.50
D.75
Ans:A
38.For a shaft fixed  at one end and carrying a rotor at the free end the nodal point will lie at
A.Free end
B.The mid length of the shaft
C.The fixed end*
D.’2/3^(rd)’of distance from the free end
Ans:C
39.For a small change of speed,if the displacement of the sleeve is high,then the governor
A.Hunting
B.Isochronous
C.Sensitive*
D.Stable
Ans:C
40.Dryness fraction is the ratio of
A.mass of dry steam to the mass of water vapour in suspension
B.Mass of water vapour in suspension to the mass of water vapour and mass of dry steam
C.Mass of dry steam to the mass of dry steam and mass of water vapour in suspension*
D.Mass of water vapour in suspension to the mass of dry steam
Ans:C
41.The function of a steam trap is
A.To stop water particles going along with steam
B.To drain off water resulting from partial condensation of steam pipes*
C.To prevent steam leaking out from the boiler
D.To regulate the steam flow rate from the boiler
Ans:B
42.For a thin cylinder subjected to internal pressure the ratio of circumferential and longitudinal stresses are in the ratio
A.2:1*
B.3:2
C.1:1
D.1:2
Ans:A
43.In a gas turbine the function of regenerator is
A.Heating the compressed air on its way to combustion chamber*
B.Heating the fuel supplied to combustion chamber
C.Heating the gases leaving the combustion chamber
D.Heating the turbine exhaust before it enters the low pressure stage
Ans:A
44.The air screw of an airplane is rotating clockwise when looking from the front.If it makes a left turn the gyroscopic effect will be
A.Tend to depress the nose and raise the tail
B.Tend to raise the nose and depress the trail*
C.Tilt the aeroplane
D.None of the above
Ans:B
45.For forced convection Nusselt number is a function of
A.Prandtl and Grashoff number
B.Reynolds Mach number
C.Reynolds and Grashoff number
D.Reynolds and Prandtl number*
Ans:D
46.If the  mean velocity of water is V,R be hydraulic mean depth,p and Meu be density and viscosity of water then Reynold number ‘(R_(e))’ is defined as
A.’V/sqrt(gR)
B.(rhoR)/(muV)’
C.’(rhoVR)/mu’*
D.None of these
Ans:C
47.Find the area of rapid sand filters required for a town having a population of 80000 with an average rate of demand as 200 litres per head per day.Assume a rate of filtration as 5000 litres per hour pen’m^(2)’of filter area.
A.’300m^(2)’
B.’200 m^(2)’*
C.’100m^(2)’
D.’400m^(2)’
Ans:B
48.Two plates of 16 mm and 14 mm are joined by fillet.What should be the size of fillet weld to be used?
A.12.5*
B.2.0
C.17.5
D.10.5
Ans:A
49.The relation between modulus of Elasticity(E)and modulus of rigidity(N)and bulk modulus(K)is given by the relation
A.`E=(3KN)/(9K-N)’
B.’E=(3KN)/(9k+N)’
C.’E=(9KN)/(3K-N)’
D.’E=(9KN)/(3K+N)’*
Ans:D
50.Due to negative skin friction on a pile,the load carrying capacity of the pile
A.Remains same
B.Decreases*
C.Increases
D.None of these
Ans:B
51.Find the discharge through a rectangular channel of width 2m,having a bed slope of 4 in 8000.The depth of flow is 1.5 m and take the value of N in Manning’s formula as 0.012
A.’3.98 m^(3)//s’*
B.’4.67 m^(3)//s’
C.’2.76m^(3)//s’
D.’8.26 m^(2)//s’
Ans:A
52.Most weather phenomena occur in the
A.Thermosphere
B.Mesosphere
C.Stratosphere
D.Troposphere*
Ans:D
53.The diameter of a rivet connecting plate of thickness 15 mm given by Unwin’s formula is
A.26 mm
B.22 mm
C.24 mm*
D.20 mm
Ans:C
54.Elongation produced in a bar of density p,length l and Young’s modulus E due to its self-weight
A.’(9.81 rhol^(2)/(2E)’*
B.’(9.81 rhol^(2)/(E)’
C.’(9.81 rhol^(2)/(2N)’
D.’(9.81 rhol^(2)I)/(2E)’
Ans:A
55.N value for medium sand lies between
A.10 to 30*
B.5 to 10
C.30 to 50
D.0 to 5
Ans:A
56.Beams of uniform strength can be made by varying the cross sectional dimension in such a way that
A.’Sigma/y’is constant
B.’M/z’is constant*
C.’E/R’is constant
D.Sectional modulus(z)is constant
Ans:B
57.The minimum specific energy ‘(E_(min))’is related to critical depth’(h_(c))’for open channel flow as’’
A.’E_(min)=(3)/(2)h_(c)’*
B.’E_(min)=(5)/(2)h_(c)’
C.’h_(c)=(3)/(2)E_(min)’
D.’h_(c)=(5)/(2)E_(min)’
Ans:A
58.The relation between porosity(n)specific yield’(S_(y))’and specific retention’(S_(r))’ is correctly given in the relationship.’’
A.’n=S_(y)-S_(r)’
B.’n=S_(y)+S_(r)’*
C.’S_(r)=S_(y)-n’
D.’S_(r)=S_(y)+n’
Ans:B
59.Initial setting time’(T_(1))and final setting time’(T_(2))’for ordinary Portland Cement is given by the relation
A.’T_(2)=90+2.4 T_(1)’
B.’T_(2)=90-2.4 T_(1)’
C.’T_(2)=90+1.2 T_(1)’*
D.’T_(2)=90-1.2 T_(1)’
Ans:C
60.The temperature strain in a steel rod is -----------proportional to the change in temperature
A.Directly*
B.Indirectly
C.Either (1) or (2)
D.Only depends on the material of the rod
Ans:A
61.In measuring horizontal angles,the error due to imperfect leveling of the plate bubble is
A.Large when sights are nearly level
B.Large for long sights
C.Less for steeply inclined sights
D.Large for steeply inclined  sights*
Ans:D
62.A cantilever 1.5 m long carries a uniformly distributed load over the entire length.Find the deflection at the free end if the slope at the free end is’1.5^(@)’
A.34.5 mm
B.15.6 mm
C.29.5 mm*
D.None of these
Ans:C
63.The heights of water on the upstream and downstream side of a submerged weir of 3m length are 20 cm and 10 cm respectively.If’C_(d)’for free and drowned portions are 0.6 and 0.8 respectively,find the discharge over the weir.
A.’0.61 m^(3)//s’
B.’0.48m^(3)//s’
C.’0.058m^(3)//s’
D.’0.51m^(3)//s’*
Ans:D
64.Activated sludge is
A.Aerated sewage in the secondary tank containing aerobic microorganisms *
B.Aerated sludge in the aerated unit
C.Sludge settled in the humus tank
D.Aerated sewage in the secondary tank containing nutrients
Ans:A
65.The maximum area of tension reinforcement in a beam having cross sectional area as’bd’shall not exceed
A.0.02 bd
B.0.03 bd
C.0.04 bd*
D.0.05 bd
Ans:C
66.A circular rod 0.2 m long tapers from 20 mm diameter at one end to 10 mm diameter at the other On applying an axial pull of 6kN,it was found to extend by 0.068 mm.Find the Young’s modulus of the material of the rod
A.’126 GN//m^(2)’
B.’106 GN//m^(2)’
C.’98 GN//m^(2)’
D.’112GN//m^(2)’*
Ans:D
67.In establishing the line of sight which of the following statement is not correct?
A.Eyepiece optical centre is needed*
B.Optical centre of the objective is needed
C.Diaphragm containing cross hairs is needed
D.None of these
Ans:A
68.Equation of flexture is given as
A.’(M)/(I)=(sigma)/(y)=(E)/(R)’*
B.’(I)/(M)=(sigma)/(y)=(E)/(R)’
C.’(M)/(I)=(y)/(sigma)=(E)/(R)’
D.’(M)/(I)=(sigma)/(y)=(R)/(E)’
Ans:A
69.A cut in the frame of a door to receive the shutter,is called
A.Groove
B.Rebate*
C.Horn
D.Louver
Ans:B
70.Lap length in compression reinforcement should not be less than-------------times the diameter of the bar.
A.16
B.20
C.24*
D.30
Ans:C
71.Moment of inertia of a quadrant circle of radius R about its XX axis is given by
A.’0.11’’xx’’R^(4)’
B.’0.055’’xx’’R^(4)’*
C.’0.011’’xx’’R^(4)’
D.’0.55’’xx’’R^(4)’
Ans:B
72.The point of contra-flexture is also called as
A.Point of inflexion*
B.A virtual hinge
C.Both(1)and (2)
D.None of these
Ans:A
73.Pitot tube is used to measure
A.Discharge
B.Pressure at a point
C.Velocity at a point*
D.None of these
Ans:C
74.Between Biochemical Oxygen Demand(BOD)and Chemical Oxygen Demand(COD)
A.BOD should always measure higher than COD
B.COD should always measure higher than COD*
C.COD should always be equal to BOD
D.Depends on the type of sewage
Ans:B
75.Queen closer may be placed
A.In header course
B.In stretcher course
C.In header course next to first brick*
D.In stretcher course next to first brick
Ans:C
76.Half life for a general ‘n^(th)’order reaction is
A.’(0.5^(n-1)-1)/(k(n-1)’’C_(A0)^(1-n)’
B.’(0.5^(1-n)-1)/(k(n-1))’’C-(AO)^(1-n)’*
C.’(0.5^(1-n)-1)/(k(1-n))’’C_(A0)^(1-n)’
D.’(0.5^(1-n)-1)/(k(n-a))’’C_(A0)^(n-1)’
Ans:B
77.After 8 minutes in a batch reactor,’C_(A0)=1mol/I’and conversion is 80%.After 18 minutes,the conversion is 90%.Then the rate equation is
A.’-r_(A)=0.5’’(C_(A)^(2)’*
B.’-r_(A)=0.25’’C_(A)^’
C.’-r_(A)=0.25’’C_(A)^(2)’
D.’-r_(A)=0.5’’C_(A)^’
Ans:A
78.Holding time (t bar)and space time(t)for flow reactors are related by
Ans:----
79.A first order reversible reaction A-><-rR is carried out in an ideal plug flow reactor.The design equation is given by;
‘M=(C_(RO))/(C_(AO))’
A.’k_(1)’’tau’=’(M+rX_(Ae))/(M+X_(A))’’[-(1+epsi_(A)X_(Ae))in(1-(X_(A))/X_(Ae))-epsi_(A)X_(A)]’
B. ’k_(1)’’tau’=’(M+rX_(Ae)’[-(1+epsi_(A)X_(Ae))in(1-(X_(A))/X_(Ae))-epsi_(A)X_(A))’
C. ’k_(1)’’tau’=’(M+rX_(Ae))/(M+r)’’[-(1+epsi_(A)X_(Ae))in(1-(X_(A))/X_(Ae))-epsi_(A)X_(A)]’*
D. ’k_(1)’’tau’=’(M+rX_(Ae))/(M+r)’’[-(1+epsi_(A)X_(A))(1-(X_(A))/X_(Ae))-epsi_(A)X_(A)]’
Ans:C
80.The rate determining step of Michaelis Menten kinetics is
A.The complex formation step
B.The complex dissociation step to produce product*
C.Both 1 and 2
D.None of the above
Ans:B
81.The thermal conductivity is maximum for
A.Silver*
B.Chrome-nickel steel
C.Plaster of paris
D.Carbon steel
Ans:A
82.A metal wire of 0.01 m diameter and thermal conductivity ‘200(W)/(mK)’is exposed to a fluid stream with a convective heat transfer coefficient ‘1000(W)/(m^(2)K’.The Biot number is
A.10
B.12.5
C.0.0035
D.0.0125*
Ans:D
83.The total heat loss by convection and radiation from an unlagged steam pipe of 50 mm outer diameter at 415 K to air at 290 K.Given a0=0.90’h_(c)=1.18(delta T/delta 0)0.25
‘W/m^(2)K’’h_(c)’=convective film coefficient
A.133’(W)/”m length of pipe”
B.344.7’(W)/”m length of pipe”*
C.230’(W)/”m length of pipe”
D.55’(W)/”m length of pipe”
Ans:B
84.A multiple effect evaporator as compared to a single effect evaporator of the same capacity has
A.Lower heat transfer area
B.Lower steam economy
C.Higher steam economy*
D.Higher solute concentration in the product
Ans:C
85.The overall heat transfer coefficient for a shell and tube heat exchanger for clean surface is ‘u_(0)=400
(W)/(m^(2)K)’.The fouling factor after one year of operation is found to be ‘hd_(0)=2000’’(W)/(m^(2)K)’.The overall heat transfer coefficient at this time is
A.1200’(W)/(m^(2)K)’
B.894’(W)/(m^(2)K)’
C.333’(W)/(m^(2)K)’*
D.287’(W)/(m^(2)K)’
Ans:C
86.In a shell and tube heat exchanger,baffles are provided on the shell side to’’
A.Prevent the stagnation of shell side fluid
B.Improve heat transfer
C.Provide support for tubes
D.All of the above*
Ans:D
87.Fanning friction factor is defined as
A.pu-2/zgc
B.tw/(pv-2/zgc)*
C.tw/(v-2/zgc)
D.tw/pv-2
Ans:B
88.A continuous gravity decanter is used for separation of two immiscible liquids A  and B of differing densities’rho_(A)’and ‘rho_(B)’.If meu is the viscosity of continuous phase,the separation time is given by
A.t=’(100 mu)/(rho_(A)+rho_(B))’
B.t=’(100 mu)/(rho_(A)rho_(B))’
C.t=’(100 mu)/(rho_(A)-rho_(B))’*
D.t=’100 murho_(A)rho_(B)’
Ans:C
89.If the suction pressure is only slightly greater than the vapour pressure
A.Some liquid may flash to vapour inside the pump*
B.There will be vapourization in the suction line
C.No liquid can be drawn into the pump
D.None of the above
Ans:A
90.The pressure loss is maximum for
A.Orificemeter*
B.Venturimeter
C.Rotameter
D.Flow nozzle
Ans:A
91.Specific surface area by differential analysis is
Ans:-----
92.If F=feed rate of solids,’C_(u)’=under flow concentration,’C_(L)’=capacity limiting layer concentration,’V_(L)’=velocity of particles through the capacity limiting layer,area of a continuous thickener is
A.(F/VL)/1/CL-1/CU*
B.(FVL)/(1/CL-1/CU)
C.(F/VL)/1/CU-1/CL)
D.(FVL)/(1/CU-1/CL)
Ans:A
93.The power required for a pro-peller mixer of diameter 25 cm for a liquid of specific gravity 1.4 and viscosity 2.5 cp for operating at a Reynolds number of 20,000 and power number is equal to 32 is given by
A.0.816 W
B.81.6 W
C.816 W
D.8.16 W*
Ans:D
94.The Henry’s law constant for oxygen in water at 298 K is’4.4 xx 10^(4)’bar.For a partial pressure of oxygen at 0.25 bar and at 298 K,the solubility of oxygen  in water is
A.’5.68 xx 10^(-5)’ moles.mole’H_(2)O’
B.5.68 moles/mole’H_(2)O’
C.’5.68 xx 10^(-6)’moles/mole ‘H_(2)O’*
D.’5.68  xx 10^(-7)’ moles/mole’H_(2)O’
Ans:C
95.A stream of nitrogen flowing at the rate of 7000 kg/h and a stream of hydrogen flowing at the rate of 1500 kg/h mix adiabatically in a steady flow process.If the gases are ideal and are at the same temperature and pressure,the rate of entropy increases in KJ/hK is
A.-4675.3*
B.4675.3
C.’4675.3 xx 10^(3)’
D.None of the above
Ans:A
96.The Lewis number is defined as
A.’(N-(pr))/(N_sc))’
B.’N_(pr)’’N_(sc)’
C.’N_(sc)/N_(pr)’*
D.’Np(r).N_(sc)^(1/2)’
Ans:C
97.If the feed is all saturated vapour,then q is given by
A.q=0*
B.q=1
C.q<1
D.q>1
Ans:A
98.A packed tower is designed to recover 98% CO_(2)’from a gas mixture containing 10%’CO_(2)’and 90% air using water.Y=14 X can be used for equilibrium conditions where Y is kg’CO_(2)’/kg dry air and X is kg’CO_(2)’/kg water.
The water to gas rate is kept 30% more than the minimum value.The height of the tower if HTU is 1 metre will be
A.10.5 m
B.11.3 m*
C.12.3 m
D.14.3 m
Ans:B
99.For any particular duty and for all positive reaction orders
A.Mixed reactor is always smaller than a plug flow reactor
B.Mixed reactor and plug flow reactor are of same volume
C.Mixed reactor is always larger than the plug flow reactor*
D.None of the above
Ans:C
100.For a gaseous reaction A+2B->R,CA0=CB0=100’C_(B)=20,’the conversion of B is
A.1.0
B.0.889*
C.0.62
D.0.53
Ans:B




1 comment:

  1. It is no disgrace to start all over.It is usually an opportunity.-George Matthew Adams.
    KERALA PSC EXAMS,UPSC Civil service Preliminary Exams
    online practices available .

    ReplyDelete

Motivation discussion 2024-ൽ പങ്കെടുത്തുകൊണ്ടിരിക്കുന്ന എല്ലാവർക്കും നന്ദി.
പ്രിയമുള്ളവരേ നിങ്ങൾ ഒരു കുറഞ്ഞ മുതൽ മുടക്കിൽ അധികവരുമാനം ആഗ്രഹിക്കുന്ന വ്യക്തിയാണോ എങ്കിൽ നിങ്ങൾക്കിതാ വലിയൊരു അവസരം വന്നു ചേർന്നിരിക്കുന്നു.
ആകർഷകമായ വ്യക്തിത്വവും ചുറുചുറുക്കുമുള്ള ആളുകൾക്ക് ശോഭിക്കാൻ പറ്റുന്ന സെയിൽസ് മേഖലയിലാണ് ഇപ്പോഴുള്ള അവസരം ഒരുങ്ങിയിട്ടുള്ളത്.

ഉടനെ തന്നെ പുറത്തിറക്കാൻ പോകുന്ന മോട്ടിവേഷൻ ബുക്കിന്റെ വിതരണത്തിനാണ് കുറഞ്ഞ മുതൽ മുടക്കിൽ നിങ്ങൾക്ക് ആരംഭിക്കാവുന്ന ബിസിനസ്‌ ചെയ്യാൻ സാധിക്കുക.

300 രുപ മുഖവിലയുള്ള പുസ്തകം 50% ഡിസ്‌കൗണ്ടിൽ നൽകുന്നതായിരിക്കും.

10500 രുപ ഇൻവെസ്റ്റ്‌ ചെയ്യുന്ന വ്യക്തിക്ക് കിട്ടുക 70 ബുക്ക്‌, അതു വിറ്റുകിട്ടുന്ന പരമാവധി തുക 21000/-(വരവ് -ചെലവ്=ലാഭം,21000-10500=10500/- പരമാവധി ലാഭം).

ഞാൻ എഴുതിയ പ്രണയ നോവൽ "എന്റെ റോസ്മോൾക്കായ്" നിങ്ങൾക്കിപ്പോൾ വായിക്കാം.
Romantic Novel Read now.
Real Estate Advertisement.
Prathilipi Article Read now.
പ്രിയമുള്ളവരേ ഞാൻ എഴുതിയ രണ്ടു മോട്ടിവേഷൻ ബുക്കുകളുടെ ഓഡിയോ SPOTIFY APPLICATION ൽ Lijopaulexamchoices എന്ന പ്രൊഫൈലിൽ ലഭ്യമാണ്.
സ്നേഹസ്പർശനമായി കൺമുൻപിൽ:A spark of love to open your eyes
Youtube Channel Audio Listen Part 1 Now.
Youtube Channel Audio Listen Part 2 Now.
Youtube Channel Audio Listen Part 3 Now.
ഉൾകൊള്ളാൻ ഉൾകാഴ്ചകൾ:The art of innerspring insight
Youtube Channel Audio Listen Part 1 Now.
Youtube Channel Audio Listen Part 2 Now.
Special offer our Motivation E-book
Our Motivation EBooks Buy Now.
Instagram,
Facebook page,
Youtube,
Whatsapp Chat Now
ഈ അവസരത്തിൽ ഞങ്ങളുടെ വെബ്സൈറ്റിലൂടെ നൽകി വരുന്ന പഴയ കാല പി എസ് സി പരീക്ഷാ ചോദ്യപേപ്പറുകൾ സൗജന്യമായി പരിശീലിക്കുവാൻ നിങ്ങൾക്ക് അവസരം നൽകുകയാണ്.
Free practice Now.
USED BOOK ORDER NOW.
ഏതു പരസ്യത്തിന്റെയും സാമ്പത്തിക ഇടപാടുകൾ സ്വന്തം ഉത്തരവാദിത്വത്തിൽ മാത്രം ചെയ്യുക.ഇടപാടുകൾ മൂലം ഉണ്ടാകുന്ന യാതൊരുവിധ കഷ്ട നഷ്ടങ്ങൾക്കും ഈ വെബ്സൈറ്റ് അധികാരികൾ ഉത്തരവാദി ആയിരിക്കുന്നതല്ല.